REAR DOOR LOCK (for Hatchback): Inspection
WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT REAR DOOR LOCK ASSEMBLY LH
- Check the operation.
- Apply battery voltage to the rear door lock and check the operation of the door lock motor.
Standard
CONNECTOR TERMINAL REFERENCE CHARTMeasurement Condition Specified Condition Battery positive (+) --> Terminal 4
Battery negative (-) --> Terminal 1Locks Battery positive (+) --> Terminal 1
Battery negative (-) --> Terminal 4Unlocks If the result is not as specified, replace the rear door lock.
- Apply battery voltage to the rear door lock and check the operation of the door lock motor.
- Check the operation.
- INSPECT REAR DOOR LOCK ASSEMBLY RH
- Check the operation.
- Apply battery voltage to the rear door lock and check the operation of the door lock motor.
Standard
CONNECTOR TERMINAL REFERENCE CHARTMeasurement Condition Specified Condition Battery positive (+) --> Terminal 4
Battery negative (-) --> Terminal 1Locks Battery positive (+) --> Terminal 1
Battery negative (-) --> Terminal 4Unlocks If the result is not as specified, replace the rear door lock.
- Apply battery voltage to the rear door lock and check the operation of the door lock motor.
- Check the operation.