Customize Parameters
WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.
- CUSTOMIZING FUNCTION WITH TECHSTREAM
HINT:
The following item can be customized.
NOTE:- When the customer requests a change in a function, first make sure that the function can be customized.
- Make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
- Connect a Techstream to the DLC3.
- Turn the ignition switch to ON.
- Turn the tester on.
- Enter the following menus: Body Electrical / Main Body / Utility / Customize.
- Select the setting by referring to the table below.
Main Body:
POWER DOOR LOCK CONTROL SYSTEMDisplay (Item) Default Function Setting UNLK/KEY TWICE ON Unlocks only driver side door when driver side door key cylinder turned to unlock once, and unlocks all doors when turned to unlock twice. For OFF setting, turning it once unlocks all doors ON/OFF