Door Control Transmitter Module: Removal

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE DOOR CONTROL TRANSMITTER MODULE
1. Remove the door control transmitter module.
1. Using a screwdriver with its tip wrapped in protective tape, pry apart the transmitter housing cover.
  NOTE: Do not use excessive force when prying apart the housing cover.
2. Remove the door control transmitter module from the transmitter housing case.
  
  Fig 1: Prying Transmitter Housing Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002