LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 186 (Door Lock) >> Door Control Transmitter Module >> Installation

Door Control Transmitter Module: Installation

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL DOOR CONTROL TRANSMITTER MODULE 
    1. Install the door control transmitter module.
      1. Install the door control transmitter module into the transmitter housing case.
        Fig 1: Identifying Door Control Transmitter Module
        G04833221Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      2. Install the transmitter housing cover onto the transmitter housing case securely.
        Fig 2: Identifying Transmitter Housing Cover Onto Transmitter Housing Case Securely
        G04833237Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002