LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 186 (Door Lock) >> DOOR CONTROL SWITCH (for Hatchback Driver Door Side) >> Installation

DOOR CONTROL SWITCH (for Hatchback Driver Door Side): Installation

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY 
    1. Install the power window regulator master switch with the 3 screws.
  2. INSTALL FRONT ARMREST BASE PANEL UPPER  (See REASSEMBLY )
  3. INSTALL DOOR ARMREST COVER  (See REASSEMBLY )
  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 

    Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

    Fig 1: Locating Screws And Power Window Regulator Master Switch
    G04834662Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002