Front Pillar Upper Cover: Removal

WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

Use the same procedures for the RH side and LH side.
The procedures listed below are for the LH side.

REMOVE FRONT PILLAR COVER SUB-ASSEMBLY UPPER LH
1. Using a moulding remover, detach the 3 clips and remove the pillar cover.
  
  Fig 1: Identifying Clips And Pillar Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002