On-Vehicle Cleaning
WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT RADIATOR ASSEMBLY
- Check that the radiator and condenser are not blocked with leaves, dirt, or insects. Clean the hose connections.
If the fins are blocked, wash them with water or a steam cleaner.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
NOTE:- If the distance between the steam cleaner and core is too close, the fins may be damaged.
- Keep the following injection distance. Standard injection distanceINJECTION PRESSURE SPECIFIED CONDITION CHART
Injection Pressure Specified Condition 2,942 to 4,903 kPa
(30 to 50 kgf/cm2 , 427 to 711 psi)300 mm (11.81 in.) 4,903 to 7,845 kPa
(50 to 80 kgf/cm2 , 711 to 1,138 psi)500 mm (19.69 in.) - If the fins are bent, straighten them with a screwdriver or pliers.
- Never apply water directly onto the electronic components.
- Dry the fins with compressed air.
- Check that the radiator and condenser are not blocked with leaves, dirt, or insects. Clean the hose connections.