LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 174 (Engine Fuel System (2GR-FE)) >> Fuel Pump Resistor >> Installation

Fuel Pump Resistor: Installation

WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL FUEL PUMP RESISTOR 
    1. Install the resistor with the 2 bolts.

      Torque: 7.0 N*m (71.4 kgf*cm, 62 in.*lbf) 

    2. Connect the connector.
      Fig 1: Identifying Fuel Pump Resistor
      G04485591Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL FUEL PUMP RESISTOR COVER 
    1. Install the cover to the resistor.
  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
scientia non olet · About LEMON Manuals