LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 174 (Engine Fuel System (2GR-FE)) >> Fuel Pressure Pulsation Damper >> Installation

Fuel Pressure Pulsation Damper: Installation

WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL FUEL PRESSURE PULSATION DAMPER 
    1. Apply a light coat of spindle oil or gasoline to a new O-ring, and install it to the pulsation damper.
    2. Install the pulsation damper to the fuel delivery pipe.
    3. Install the clip.
  2. INSTALL INTAKE AIR SURGE TANK ASSEMBLY (See appropriate step(s) under  INSTALLATION  ) 
  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
scientia non olet · About LEMON Manuals