Inspection Procedure
WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM ACTIVE TEST USING TECHSTREAM
- Select the Active Test, use the Techstream to generate a control command, and then check that the seat belt warning light operates.
Center airbag sensor:
ACTIVE TEST DETAILItem Test Details Diagnosis Note D-BELT REMIND D-SEAT BELT warning light (OFF/ON) - OK: Driver side seat belt warning light operates normally.
NG: REPLACE COMBINATION METER ASSEMBLY
OK: REPLACE CENTER AIRBAG SENSOR ASSEMBLY
- Select the Active Test, use the Techstream to generate a control command, and then check that the seat belt warning light operates.