Data List / Active Test
WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
- ACTIVE TEST
HINT:
Performing the Techstream ACTIVE TEST allows relay, VSV, actuator and other items to be operated without removing any parts. Performing the ACTIVE TEST early in troubleshooting is one way to save time. The DATA LIST can be displayed during the ACTIVE TEST.
- Connect the Techstream to the DLC3.
- Turn the ignition switch ON.
- Perform the ACTIVE TEST according to the display on the tester.
Center airbag sensor:
ACTIVE TEST DETAILItem Test Details Control Range Diagnostic Note D-Seat Belt D-SEAT BELT warning light OFF / ON Confirm that the vehicle is stopped, engine idling P-Seat Belt P-SEAT BELT warning light OFF / ON Confirm that the vehicle is stopped, engine idling