Front Seat Outer Belt Assembly With PRETENSIONER: Inspection

WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.

INSPECT FRONT SEAT OUTER BELT ASSEMBLY
NOTE: Do not disassemble the retractor.
1. Before installing the outer belt, check the ELR.
  1. When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is over 45°, check that the belt locks. If the result is not as specified, replace the outer belt assembly.
    
    Fig 1: Inspecting Front Seat Outer Belt Operation
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002