Child Restraint Seat Tether Anchor: Installation

WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.

HINT: Refer to appropriate step(s) under "Reassembly and Installation".

INSTALL CHILD RESTRAINT SEAT PROTECTOR
INSTALL CHILD RESTRAINT SEAT TETHER ANCHOR BRACKET
1. Align the claws with the positioning holes, and install the bracket with the bolt.
  Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf)
  
  Fig 1: Installing Child Restraint Seat Tether Anchor Bracket
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL ROOF HEADLINING ASSEMBLY
1. Install the roof headlining (see INSTALLATION ).
INSTALL CHILD RESTRAINT SEAT TETHER ANCHOR COVER
1. Install the cover with the 4 claws.
  
  Fig 2: Installing Child Restraint Seat Tether Anchor Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002