LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 159 (Seat) >> Front Seatback Heater >> Inspection

Front Seatback Heater: Inspection

WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT FRONT SEATBACK HEATER ASSEMBLY LH 
    1. Measure the resistance of the seatback heater.

      Standard resistance 

      FRONT SEATBACK HEATER-RESISTANCE SPECIFIED CONDITION

      Tester Connection Condition Specified Condition
      1 - 2 Seatback heater temperature 20°C (68°F) Approx. 6.21 Ω
      Fig 1: Inspecting Front Seatback Heater Assembly
      G04491985Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      If the result is not as specified, replace the seatback heater assembly.

  2. INSPECT FRONT SEATBACK HEATER ASSEMBLY RH 

    HINT:

    Use the same procedures described for the LH side (see INSPECTION ).