LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 159 (Seat) >> Front Seat Frame With Adjuster >> Inspection

Front Seat Frame With Adjuster: Inspection

WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT FRONT SEAT FRAME WITH ADJUSTER 
    1. Check operation of the seat frame (slide motor).
      1. Check if the seat frame moves smoothly when the battery is connected to the slide motor connector terminals.

        OK 

        SLIDE MOTOR-OPERATIONAL CONDITION CHART

        Measurement Condition Operational Direction
        Battery positive (+) --> 1 (FWD)
        Battery negative (-) --> 2 (BACK)        		 Forward
        Battery positive (+) --> 2 (BACK)
        Battery negative (-) --> 1 (FWD)        		 Backward
        Fig 1: Identifying Slide Motor Connector Terminal
        G04491973Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

        If the result is not as specified, replace the seat frame with adjuster.

    2. Check operation of the seat frame (front vertical motor).
      1. Check if the seat frame moves smoothly when the battery is connected to the front vertical motor connector terminals.

        OK 

        FRONT VERTICAL MOTOR-OPERATIONAL CONDITION CHART

        Measurement Condition Operational Direction
        Battery positive (+) --> 1 (UP)
        Battery negative (-) --> 2 (DOWN)        		 Upward
        Battery positive (+) --> 2 (DOWN)
        Battery negative (-) --> 1 (UP)        		 Downward
        Fig 2: Identifying Front Vertical Motor Connector Terminal
        G04491974Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

        If the result is not as specified, replace the seat frame with adjuster.

    3. Check operation of the seat frame (lifter motor).
      1. Check if the seat frame moves smoothly when the battery is connected to the lifter motor connector terminals.

        OK 

        LIFTER MOTOR-OPERATIONAL CONDITION CHART

        Measurement Condition Operational Direction
        Battery positive (+) --> 2 (UP)
        Battery negative (-) --> 1 (DOWN)        		 Upward
        Battery positive (+) --> 1 (DOWN)
        Battery negative (-) --> 2 (UP)        		 Downward
        Fig 3: Identifying Lifter Motor Connector Terminal
        G04491975Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

        If the result is not as specified, replace the seat frame with adjuster.

    4. Check operation of the seat frame (reclining motor).
      1. Check if the seat frame moves smoothly when the battery is connected to the reclining motor connector terminals.

        OK 

        RECLINING MOTOR-OPERATIONAL CONDITION CHART

        Measurement Condition Operational Direction
        Battery positive (+) --> 2 (FWD)
        Battery negative (-) --> 1 (BACK)        		 Forward
        Battery positive (+) --> 1 (BACK)
        Battery negative (-) --> 2 (FWD)        		 Backward
        Fig 4: Identifying Reclining Motor Connector Terminal
        G04491976Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

        If the result is not as specified, replace the seat frame with adjuster.

scientia non olet · About LEMON Manuals