Drive Belt: Removal
WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
- REMOVE RADIATOR SUPPORT OPENING COVER
- REMOVE FRONT WHEEL RH
- REMOVE FRONT FENDER APRON RH
- REMOVE FRONT SUSPENSION MEMBER REINFORCEMENT RH
- Remove the 4 bolts and reinforcement RH.
- REMOVE FAN AND GENERATOR V BELT
- Using SST and 19 mm socket wrench, loosen the V-ribbed belt tensioner arm clockwise, then remove the fan and generator V belt.
SST 09216-42010
NOTE:- Be sure to connect SST and the tools so that they are in line during use.
- When retracting the tensioner, turn it clockwise slowly for 3 seconds or more. Do not apply force rapidly.
- After the tensioner is fully retracted, do not apply force any more than necessary.
- Using SST and 19 mm socket wrench, loosen the V-ribbed belt tensioner arm clockwise, then remove the fan and generator V belt.