Rear Shock Absorber: Inspection

WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.

INSPECT REAR SHOCK ABSORBER ASSEMBLY LH
1. Compress and extend the shock absorber rod, and check that there is no abnormal resistance or unusual sound during operation.
  If there is any abnormality, replace the shock absorber with a new one.
  
  NOTE: When disposing of the shock absorber, see DISPOSAL .
  
  Fig 1: Inspecting Rear Shock Absorber Assembly LH
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002