Cylinder Head
WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
CYLINDER HEAD SPECIFIED CONDITION
| Part Tightened | N*m | kgf*cm | ft.*lbf | |
|---|---|---|---|---|
| Camshaft position sensor x Cylinder head | 9.0 | 92 | 80 in.*lbf | |
| Oil pressure switch x Cylinder head | 13 | 133 | 10 | |
| Radio setting condenser x Cylinder head | 10 | 102 | 7 | |
| Cylinder head set bolt Cylinder head x Cylinder block | 1st | 70 | 714 | 52 |
| 2nd | Turn 90° | Turn 90° | Turn 90° | |
| Camshaft timing gear x Camshaft | 54 | 551 | 40 | |
| No. 2 camshaft timing sprocket x No. 2 camshaft | 54 | 551 | 40 | |
| No. 1 and No. 2 camshaft bearing cap x Cylinder head | 29.5 | 301 | 22 | |
| No. 3 camshaft bearing cap x Cylinder head | 9.0 | 92 | 80 in.*lbf | |
| Exhaust manifold x Cylinder head | 37 | 377 | 27 | |
| No. 1 exhaust manifold heat insulator x Exhaust manifold | 12 | 122 | 9 | |
| No. 1 and No. 2 manifold stay x Cylinder block, Exhaust manifold | 44 | 449 | 32 | |
| Oil dipstick guide x Cylinder block | 9.0 | 92 | 80 in.*lbf | |