DTC C1336/39 Zero Point Calibration of Acceleration Sensor Undone: Description

WARNING: This page is about a different car, the 2007 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

DTC DESCRIPTION

DTC No.	DTC Detection Condition	Trouble Area
C1336/39	When either of the following 1. or 2. is detected: In TEST mode, the shift lever is shifted to other than P position within 2 sec. after ECU terminal IG1 is turned ON for the first time. When the deceleration sensor zero point recorded in ECU is detected.	Deceleration sensor Deceleration sensor circuit PNP switch circuit (R position)