Tire Pressure Warning Valve And Transmitter: Disposal

WARNING: This page is about a different car, the 2007 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

The tire pressure warning valve and transmitter is powered by a lithium battery. When disposing of the tire pressure warning valve and transmitter, remove the battery and dispose of it correctly.

DISPOSE OF TIRE PRESSURE WARNING VALVE AND TRANSMITTER
1. Using a screwdriver, pry off the cover. Remove the back cover.
  
  Fig 1: Prying Off Back Cover Using Screwdriver
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. The battery and base board covered with silicone resin are exposed. While taking out the battery, cut the 2 terminals which connect the battery and base board.
Fig 2: Identifying Battery & Terminals
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002