LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 144 (Engine Control System (2UZ-FE)) >> SFI System >> DTC P0335 Crankshaft Position Sensor "A" Circuit: DTC P0339 Crankshaft Position Sensor "A" Circuit Intermittent >> Monitor Description

Monitor Description

WARNING: This page is about a different car, the 2007 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

If there is no signal from the Crankshaft Position (CKP) sensor even though the engine is revolving, the ECM interprets this as a malfunction of the sensor.

This monitor runs for 10 seconds (the first 10 seconds of engine idle) after the engine is started.

scientia non olet · About LEMON Manuals