LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 144 (Engine Control System (2UZ-FE)) >> SFI System >> DTC P0125 Insufficient Coolant Temperature for Closed Loop Fuel Control >> Typical Enabling Conditions

Typical Enabling Conditions

WARNING: This page is about a different car, the 2007 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

All 

TYPICAL ENABLING CONDITIONS

Monitor will run whenever these DTCs are not present P0100 - P0103 (MAF sensor)
P0110 - P0113(IAT sensor)
P0115 - P0118 (ECT sensor)

Case 1 

TYPICAL ENABLING CONDITIONS CHART

Engine coolant or intake air temperature at engine start -8.34°C(17°F) or more

Case 2 

TYPICAL ENABLING CONDITIONS CHART

Engine coolant or intake air temperature at engine start Between -19.45°C (-3°F) and -8.34°C (17°F)

Case 3 

TYPICAL ENABLING CONDITIONS CHART

Engine coolant or intake air temperature at engine start -19.45°C (-3°F) or less
TYPICAL ENABLING CONDITIONS CHART

Engine Running
Fuel cut OFF
Idle OFF