Speed Sensor: Removal

WARNING: This page is about a different car, the 2007 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE SPEEDOMETER SENSOR
1. Disconnect the sensor connector.
  
  Fig 1: Identifying Speedometer Sensor Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the bolt and the sensor.
3. Remove the clip and the driven gear from the sensor.
4. Remove the O-ring from the sensor.
Fig 2: Removing Speedometer Sensor
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE TRANSMISSION REVOLUTION SENSOR (NT) AND (SP2)
1. Disconnect the sensor connectors.
2. Remove the 2 bolts, revolution sensor (SP2) and (NT).
  
  Fig 3: Locating Transmission Revolution Sensors
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Remove the 2 O-rings from the revolution sensor (SP2) and (NT).
Fig 4: Identifying Revolution Sensor O-Ring
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002