LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 143 (Automatic Transmission - A750F) >> Automatic Transmission System >> DTC P0985 Shift Solenoid "E" Control Circuit Low (Shift Solenoid Valve SR); DTC P0986 Shift Solenoid "E" Control Circuit High (Shift Solenoid Valve SR) >> Typical Enabling Conditions

Typical Enabling Conditions

WARNING: This page is about a different car, the 2007 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

All 

TYPICAL ENABLING CONDITIONS

The monitor will run whenever this DTC is not present. None

P0982: Range check (Low resistance) 

TYPICAL ENABLING CONDITIONS

Shift solenoid valve SR ON
Battery voltage 8 V or more
Ignition switch ON
Starter OFF

P0983: Range check (High resistance) 

TYPICAL ENABLING CONDITIONS

Shift solenoid valve SR OFF
Battery voltage 8 V or more
Ignition switch ON
Starter OFF