Typical Enabling Conditions
WARNING: This page is about a different car, the 2007 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
The stop light switch remains on during GO and STOP 5 times.
GO and STOP is defined as follows:
TYPICAL ENABLING CONDITIONS
| The monitor will run whenever this DTC is not present. | None |
| GO: (Vehicle speed is 30 km/h (18.63 mph) or more) | Once |
| STOP: (Vehicle speed is less than 3 km/h (1.86 mph)) | Once |
| Starter | OFF |
| Battery voltage | 8 V or more |
| Ignition switch | ON |