Camshaft Timing Oil Control Valve Assembly: Installation

WARNING: This page is about a different car, the 2007 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY
1. Apply a light coat of engine oil to new 4 O-rings of the oil control valves.
2. Install the O-rings to the 4 oil control valves.
  
  Fig 1: Identifying Camshaft Timing Oil Control Valve O-Ring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Install the 4 oil control valves with the 4 bolts.
  Torque: 9.0 N*m (92 kgf*cm, 80 in.*lbf)
  
  NOTE: Make sure that the O-ring is not cracked or jammed.
4. Connect the 4 oil control valve connectors.
INSTALL INTAKE AIR SURGE TANK ASSEMBLY (see INSTALLATION )
CHECK FOR ENGINE OIL LEAKS
1. Start the engine, and check that there are no oil leaks.
Fig 2: Locating Oil Control Valves Bolts
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002