Front Wiper Rubber: Removal

WARNING: This page is about a different car, the 2007 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE FRONT WIPER BLADE
1. Detach the claw as shown in the illustration.
  
  Fig 1: Detaching Claw
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the wiper blade as shown in the illustration.
  NOTE: Do not fold the wiper arm with the wiper blade removed. The arm tip may damage the windshield surface.
  
  Fig 2: Removing Wiper Blade
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE WIPER RUBBER
1. Detach the head part (large side) of the wiper rubber from the wiper blade.
  
  Fig 3: Removing Wiper Rubber
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the wiper rubber in the direction indicated by the arrow in the illustration.
  NOTE: Do not pull out the wiper rubber forcibly. Doing so will deform the backing plate or damage the blade claw.
3. Remove the 2 wiper rubber backing plates from the wiper rubber.
  
  Fig 4: Detaching Head Part (Large Side) Of Wiper Rubber From Wiper Blade
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002