Front Seat Inner Belt Assembly: Removal

WARNING: This page is about a different car, the 2007 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.

HINT: Refer to appropriate step(s) under "Removal and Disassembly".

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
REMOVE FRONT SEAT TRACK BRACKET OUTER COVER LH (See REMOVAL )
REMOVE FRONT SEAT TRACK BRACKET INNER COVER LH (See REMOVAL )
REMOVE SEAT TRACK BRACKET COVER OUTER FRONT RH
1. Use the same procedures described for the LH side.
REMOVE SEAT TRACK BRACKET COVER INNER FRONT RH
1. Use the same procedures described for the LH side.
REMOVE FRONT SEAT ASSEMBLY (for Power Seat) (See REMOVAL )
REMOVE FRONT SEAT ASSEMBLY (for Manual Seat) (See REMOVAL )
REMOVE FRONT SEAT CUSHION SHIELD RH (for Power Seat) (See DISASSEMBLY )
REMOVE FRONT SEAT CUSHION INNER SHIELD LH (for Manual Seat) (See DISASSEMBLY )
REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Power Seat)
1. for Driver Seat:
  Disconnect the 2 connectors and detach the 2 clamps.
2. for Passenger Seat:
  Disconnect the connector and detach the 2 clamps.
3. Remove the nut and seat belt.
  
  Fig 1: Removing Front Seat Inner Belt Assembly (Power Seat)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Manual Seat)
1. for Driver Seat:
  Disconnect the 2 connectors and detach the 3 clamps.
2. for Passenger Seat:
  Disconnect the connector and detach the 2 clamps.
3. Remove the nut and seat belt.
  
  Fig 2: Removing Nut And Seat Belt (Manual Seat)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002