LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 124 (Suspension System) >> Front Stabilizer Bar >> Removal

Front Stabilizer Bar: Removal

WARNING: This page is about a different car, the 2007 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FRONT WHEEL 
  2. REMOVE FRONT STABILIZER LINK ASSEMBLY LH 
    1. Remove the 2 nuts and stabilizer link.
      Fig 1: Removing 2 Nuts And Stabilizer Link
      G04489222Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE FRONT STABILIZER LINK ASSEMBLY RH 

    HINT:

    Use the same procedures described for the LH side.

  4. REMOVE FRONT SUSPENSION MEMBER BRACE FRONT LH 
    1. Remove the 4 bolts and member brace from the crossmember.
      Fig 2: Removing 4 Bolts And Member Brace From Crossmember
      G04489223Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE FRONT SUSPENSION MEMBER BRACE FRONT RH 

    HINT:

    Use the same procedures described for the LH side.

  6. REMOVE FRONT STABILIZER BAR 
    1. Remove the stabilizer bar from the crossmember.
  7. REMOVE FRONT NO. 1 STABILIZER BAR BUSH LH 
    1. Remove the bush from the stabilizer bar.
  8. REMOVE FRONT NO. 1 STABILIZER BAR BUSH RH 

    HINT:

    Use the same procedures described for the LH side.