On-Vehicle Inspection
WARNING: This page is about a different car, the 2007 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT RELAY (Marking: HTR)
- Measure the resistance of the HTR relay.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Standard resistance
TERMINALS RESISTANCE SPECIFICATION
| Tester Connection |
Specified Condition |
| 3 - 4 |
Below 1 |
| 3 - 5 |
10 k or higher |
| 3 - 5 |
Below 1
(when battery voltage is applied to terminals 1 and 2) |
If the result is not as specified, replace the relay.