Vacuum Switching Valve: Installation

WARNING: This page is about a different car, the 2007 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL PURGE VSV
1. Install the purge VSV onto the air cleaner hose.
  
  Fig 1: Installing Purge VSV Onto Air Cleaner Hose
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the 2 purge line hoses to the purge VSV. (See Fig 2).
3. Connect the wire harness clamp.
4. Connect the purge VSV connector.
Fig 2: Connecting Purge VSV
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL