LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Air Conditioning) >> Evaporator Temperature Sensor >> Removal

Evaporator Temperature Sensor: Removal

WARNING: This page is about a different car, the 2006 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  2. REMOVE COOLING UNIT 
    1. Remove the cooling unit (see REMOVAL  ).
  3. REMOVE EVAPORATOR SUB-ASSEMBLY (See  REMOVAL   ) 
  4. REMOVE EVAPORATOR TEMPERATURE SENSOR 
    1. Remove the evaporator temperature sensor from evaporator.
      Fig 1: Removing Evaporator Temperature Sensor From Evaporator
      G04440640Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals