Air Outlet Control Servo Motor: Installation

WARNING: This page is about a different car, the 2006 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL AIR OUTLET SERVO MOTOR
1. Install the servo motor with the 3 screws.
2. Connect the connector.
INSTALL NO. 1 LOWER PANEL (See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Fig 1: Installing Air Outlet Servo Motor
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
PERFORM INITIALIZATION
1. Perform initialization (see INITIALIZATION ).
  NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.