DTC 32, 42: Air Inlet Damper Position Sensor Circuit; Air Inlet Damper Control Servo Motor Circuit: Description

WARNING: This page is about a different car, the 2006 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: TP Terminal Voltage & Damper Opening Angle Graph

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

This sensor detects the position of the air inlet damper and sends the appropriate signals to the A/C amplifier.

The position sensor is built into the air inlet servomotor.

DETECTION ITEM AND TROUBLE AREA

DTC No.	Detection Item	Trouble Area
32	Short to ground or to power source circuit in air inlet damper position sensor circuit	Air inlet damper position sensor Harness or connector between air inlet damper position sensor and A/C amplifier A/C amplifier
42	Air inlet damper position sensor value does not change even if A/C amplifier operates air inlet damper control servomotor TP Terminal Voltage