LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 109 (Engine Lubrication System (2GR-FE)) >> Oil Pump >> Disassembly

Oil Pump: Disassembly

WARNING: This page is about a different car, the 2007 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE OIL PUMP RELIEF VALVE 
    1. Using a 27 mm socket wrench, remove the plug.
    2. Remove the valve spring and oil pump relief valve.
      Fig 1: Removing Plug, Valve Spring & Oil Pump Relief Valve
      G04485955Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE OIL PUMP COVER 
    1. Remove the 8 bolts, oil pump cover, drive rotor and driven rotor.
      NOTE: Be careful not to damage the drive and driven rotors.
      Fig 2: Removing Oil Pump Cover Bolts
      G04485956Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002