LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 105 (Automatic Transmission - U151F) >> Automatic Transaxle System >> DTC P0796 Pressure Control Solenoid "C" Performance (Shift Solenoid Valve SL3) >> Typical Malfunction Thresholds

Typical Malfunction Thresholds

WARNING: This page is about a different car, the 2007 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.

Either of the following conditions is met: OFF malfunction (A) and (B), or ON malfunctions (A), (B) and (C) 

2 detections are necessary per driving cycle:

1st detection: temporary flag ON

2nd detection: pending fault code ON

OFF malfunction (A): 

TYPICAL MALFUNCTION THRESHOLDS CHART

Input (turbine) speed/Intermediate shaft speed 0.93 to 1.07

OFF malfunction (B): 

TYPICAL MALFUNCTION THRESHOLDS CHART

Intermediate shaft speed/Output speed 1.02 to 1.16

ON malfunction (A): 

TYPICAL MALFUNCTION THRESHOLDS CHART

Input (turbine) speed/Intermediate shaft speed 0.93 to 1.07

ON malfunction (B): 

TYPICAL MALFUNCTION THRESHOLDS CHART

Input (turbine) speed - Intermediate shaft speed 700 rpm or more

ON malfunction (C): 

TYPICAL MALFUNCTION THRESHOLDS CHART

Input (turbine) speed - Intermediate shaft speed Less than -500 rpm or 700 rpm or more