DTC P0776 Pressure Control Solenoid "B" Performance (Shift Solenoid Valve SL2): Description
WARNING: This page is about a different car, the 2007 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
The ECM uses signals from the output shaft speed sensor and input speed sensor to detect the actual gear position (1st, 2nd, 3rd or O/D gear).
Then the ECM compares the actual gear with the shift schedule in the ECM memory to detect mechanical problems of the shift solenoid valves, valve body or automatic transaxle (clutch, brake, gear, etc.).
DTC CHART
| DTC No. | DTC Detection Conditions | Trouble Areas |
|---|---|---|
| P0776 | Gear required by the ECM does not match the actual gear when driving (2 trip detection logic) |
|