Typical Malfunction Thresholds

WARNING: This page is about a different car, the 2007 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.

Either of the following conditions is met:

OFF malfunction, or ON malfunction (A) and (B)

2 detections are necessary per driving cycle:

1st detection: temporary flag ON

2nd detection: pending fault code ON

OFF malfunction

TYPICAL ENABLING CONDITIONS

Input (turbine) speed/Intermediated shaft speed

1.49 to 1.63

ON malfunction (A)

TYPICAL ENABLING CONDITIONS

Input (turbine) speed/Intermediated shaft speed

2.72 to 2.86

ON malfunction (B)

TYPICAL ENABLING CONDITIONS

Engine speed - Input (turbine) speed

250 rpm or more