Parking Brake Assembly: Removal

REMOVE REAR WHEEL
SEPARATE REAR DISC BRAKE CALIPER ASSEMBLY
1. Remove the 2 bolts and 2 washers and separate the disc brake caliper assembly.
  NOTE: Suspend the disc brake caliper assembly with a piece of rope.
  
  Fig 1: Identifying Disc Brake Caliper Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE REAR DISC
1. Release the parking brake lever.
2. Place matchmarks on the disc and axle hub and remove the disc.
  HINT:
  
  If the disc cannot be removed easily, turn the shoe adjuster until the wheel turns freely.
  
  Fig 2: Identifying Shoe Adjuster
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002