Rear Brake Flexible Hose: Removal

REMOVE REAR WHEEL
DRAIN BRAKE FLUID
NOTE: Immediately wash off any brake fluid that comes into contact with any painted surfaces.
REMOVE REAR FLEXIBLE HOSE
1. Remove the union bolt and gasket and separate the flexible hose from the disc brake cylinder.
  HINT:
  
  Use a container to collect the brake fluid as it drains out.
  
  Fig 1: Locating Brake Tube
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Using a union nut wrench, separate the brake tube while holding the flexible hose with a wrench.
  HINT:
  
  Use a container to collect the brake fluid as it drains out.
3. Remove the clip and flexible hose.
REMOVE REAR BRAKE TUBE FLEXIBLE HOSE
1. Using a union nut wrench, separate the brake tubes while holding the flexible hose with a wrench.
  HINT:
  
  Use a container to collect the brake fluid as it drains out.
  
  Fig 2: Locating Rear Brake Tube Flexible Hose
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the 2 clips and flexible hose.