Hydraulic Brake Booster: Disposal

DISPOSE OF BRAKE BOOSTER ACCUMULATOR ASSEMBLY
1. Place the brake booster accumulator in a vise and cover it with a cloth.
2. Slowly cut a hole in area A on the brake booster accumulator as shown in the illustration. And discharge the gas and liquid inside.
  NOTE:
  - As gas may spray out, cover the brake booster accumulator with a cloth when performing the operation.
    
    Fig 1: Identifying Area For Making Hole On Brake Booster Accumulator
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  - Work slowly and do not cut the hole too quickly or suddenly.
  - Wear protective glasses during the operation.
3. When the outer body of the brake booster accumulator is cut, gas and liquid discharge.
  HINT:
  - The gas is colorless, odorless and nonpoisonous nitrogen gas.
  - The liquid is brake fluid.