Front Brake Pad, Brake Caliper & Brake Rotor: Removal

REMOVE FRONT WHEEL
DRAIN BRAKE FLUID
NOTE: Immediately wash off any brake fluid that comes into contact with any painted surfaces.
REMOVE FRONT DISC BRAKE ANTI RATTLE WITH HOLE PIN
1. Remove the 2 pin hold clips, then remove the 2 hole pins from the disc brake cylinder.
2. Remove the anti rattle spring from the disc brake pad.
REMOVE FRONT DISC BRAKE PAD
1. Remove the 2 disc brake pads with anti squeal shims from the disc brake cylinder.
REMOVE FRONT ANTI SQUEAL SHIM KIT
1. Remove the No. 1 and No. 2 anti squeal shims from each of the disc brake pads.
REMOVE DISC BRAKE CYLINDER ASSEMBLY
1. Using a union nut wrench, separate the brake tube from the disc brake cylinder.
  HINT:
  
  Use a container to collect the brake fluid as it drains out.
  
  Fig 2: Identifying Brake Tube From Disc Brake Cylinder
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the 2 bolts and disc brake cylinder.
  
  Fig 3: Identifying Disc Brake Cylinder Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FRONT DISC
1. Place matchmarks on the disc and the axle hub and remove the disc.