LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes - Mechanical >> Front Brake Flexible Hose >> Removal

Front Brake Flexible Hose: Removal

  1. REMOVE FRONT WHEEL 
  2. DRAIN BRAKE FLUID 
    NOTE: Immediately wash off any brake fluid that comes into contact with any painted surfaces.
  3. REMOVE FRONT FLEXIBLE HOSE 
    1. Using a union nut wrench, separate the brake tubes while holding the flexible hose with a wrench.

      HINT:

      Use a container to collect the brake fluid as it drains out.

      Fig 1: Locating Brake Tubes
      G05580035Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 clips and flexible hose.
scientia non olet · About LEMON Manuals