REAR SEAT ASSEMBLY (for LH Side): Installation

INSTALL REAR SEATBACK ASSEMBLY
1. Engage the hook and temporarily install the rear seatback with the 2 bolts.
2. Tighten the 2 bolts.
  Torque: 37 N*m (375 kgf*cm, 27 ft.*lbf)
3. Install the rear center seat inner belt into the rear seatback holder.
  
  Fig 1: Identifying Rear Seatback Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL REAR SEATBACK BOARD CARPET ASSEMBLY
1. Engage the 8 clips and install the rear seatback board carpet.
2. Pull up the rear seatback.
  
  Fig 2: Identifying Rear Seatback Board Carpet Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL REAR SEAT CUSHION ASSEMBLY
1. Insert the 2 locating pins into the body hole.
2. Temporarily install the rear seat cushion with the 2 bolts.
3. Tighten the 2 bolts.
  Torque: 37 N*m (375 kgf*cm, 27 ft.*lbf)
  
  Fig 3: Identifying Rear Seat Cushion Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002