Front Bumper: Removal

1. Using a clip remover, remove the 2 clips.
2. Remove the 2 screws.
3. Disengage the 5 clips and remove the radiator grille.
   Fig 1: Identifying Radiator Grille Screws & Clips

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Apply protective tape.
   Fig 2: Identifying Protective Tape

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Using a clip remover, remove the 5 clips.
   Fig 3: Identifying Front Bumper Clips

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Remove the 8 screws and the 4 bolts.
   Fig 4: Identifying Front Bumper Screws & Bolts

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Disengage the 2 claws and remove the front bumper cover.
   Fig 5: Identifying Front Bumper Cover Claws

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. Remove the 4 clips.
   Fig 6: Identifying Front Bumper Cover Clips

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Remove the 2 screws.
2. Disengage the 2 claws and remove the front bumper side support.
   Fig 7: Identifying Front Bumper Side Support Screws & Claws

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

HINT:

Use the same procedure as for the LH side.

1. Disengage the clip and the 2 claws and remove the front bumper filler.
   Fig 8: Identifying Front Bumper Filler LH Clip & Claws

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

HINT:

Use the same procedure as for the LH side.

1. Remove the 3 bolts.
2. Disengage the 2 hooks and remove the front bumper upper retainer.
   Fig 9: Identifying Front Bumper Upper Retainer Bolts

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Remove the 4 nuts and the front bumper reinforcement.
   Fig 10: Identifying Front Bumper Reinforcement Nuts

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Remove the 4 nuts and the front bumper extension.
   Fig 11: Identifying Front Bumper Extension Nuts

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

HINT:

Use the same procedure as for the LH side.