Front Bumper: Installation

INSTALL FRONT BUMPER EXTENSION LH
1. Install the front bumper extension with the 4 nuts.
  Torque: 65 N*m (665 kgf*cm, 48 ft.*lbf)
  
  Fig 1: Identifying Front Bumper Extension Nuts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT BUMPER EXTENSION RH
HINT:

Use the same procedure as for the LH side.
INSTALL FRONT BUMPER REINFORCEMENT
1. Install the front bumper reinforcement with the 4 nuts.
  Torque: 65 N*m (665 kgf*cm, 48 ft.*lbf)
  
  Fig 2: Identifying Front Bumper Reinforcement Nuts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT BUMPER UPPER RETAINER
1. Engage the 2 hooks and install the front bumper upper retainer.
2. Tighten the 3 bolts.
  Torque: 8.0 N*m (80 kgf*cm, 71 in.*lbf)
  
  Fig 3: Identifying Front Bumper Upper Retainer Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT BUMPER FILLER LH
1. Engage the clip and the 2 claws and install the front bumper filler.
  
  Fig 4: Identifying Front Bumper Filler Clip & Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT BUMPER FILLER RH
HINT:

Use the same procedure as for the LH side.
INSTALL FRONT BUMPER SIDE SUPPORT LH
1. Engage the 2 claws and install the front bumper side support.
2. Tighten the 2 screws.
  Torque: 3.0 N*m (30 kgf*cm, 27 in.*lbf)
  
  Fig 5: Identifying Front Bumper Side Support Screws & Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT BUMPER SIDE SUPPORT RH
HINT:

Use the same procedure as for the LH side.
INSTALL FRONT BUMPER COVER
1. Install the 4 clips.
  
  Fig 6: Identifying Front Bumper Cover Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Engage the 2 claws and install the front bumper cover.
  
  Fig 7: Identifying Front Bumper Cover Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Tighten the 8 screws and the 4 bolts.
  Torque: 3.0 N*m (30 kgf*cm, 27 in.*lbf) for screw 8.0 N*m (80 kgf*cm, 71 in.*lbf) for bolt
  
  Fig 8: Identifying Front Bumper Screws & Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Install the 5 clips.
  
  Fig 9: Identifying Front Bumper Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. Remove the protective tape.
  
  Fig 10: Identifying Protective Tape
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL RADIATOR GRILLE
1. Engage the 5 clips and install the radiator grille.
2. Tighten the 2 screws.
  Torque: 3.0 N*m (30 kgf*cm, 27 in.*lbf)
3. Install the 2 clips.
  
  Fig 11: Identifying Radiator Grille Screws & Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002