Front Door Speaker: Removal

HINT:

The procedure described below is for the RH side. Use the same procedure for both the RH and LH sides, unless otherwise specified.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
2. REMOVE FRONT DOOR ARMREST BASE UPPER PANEL  (See DISASSEMBLY )
3. REMOVE FRONT DOOR TRIM BOARD SUBASSEMBLY  (See DISASSEMBLY )
4. REMOVE FRONT NO. 1 SPEAKER ASSEMBLY 
   1. Disconnect the speaker connector.
      Fig 1: IdentifyingFront No. 1 Speaker Connector

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Remove the 4 screws and the front No. 1 speaker.
   Fig 2: Identifying Front No. 1 Speaker Screws

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002