LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter >> Light Control Rheostat >> Removal

Light Control Rheostat: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY  (See REMOVAL )
  3. REMOVE LIGHT CONTROL RHEOSTAT 
    1. Disconnect the connector.
    2. Disengage the 2 claws and remove the light control rheostat.
      Fig 1: Identifying Light Control Rheostat
      G05114026Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals