LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Corolla LE, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Starting System (1ZZ-FE) >> Starter Relay >> Inspection

Starter Relay: Inspection

  1. INSPECT STARTER RELAY ASSEMBLY 
    1. Check the starter relay resistance.
      1. Using an ohmmeter, measure the resistance between the terminals.

        Resistance 

        TESTER CONNECTION SPECIFIED CONDITION

        Tester Connection Specified Condition
        3 - 5 10 kΩ or higher
        3 - 5 Below 1 Ω (Apply battery voltage to terminals 1 and 2)

        If the result is not as specified, replace the starter relay.

        2. Fig 1: Checking Starter Relay Resistance
        G05193473Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals