Data List / Active Test

HINT:

By accessing the DATA LIST displayed on the Techstream, you can perform such functions as reading the values of switches and sensors without removing any parts. Reading the DATA LIST as the first step in troubleshooting is one method to shorten labor time.

DATA LIST FOR CENTER AIRBAG SENSOR ASSEMBLY

Connect the Techstream to the DLC3.
Turn the ignition switch to the ON position.
Turn the tester on.
Enter the following menus: BODY ELECTRICAL / SRS AIRBAG / DATA LIST.
Check the values by referring to the table below.

DATA LIST

Tester Display	Measurement Item/Range	Normal Condition	Diagnostic Note
D SEAT POSITION	Seat position (Driver side)/ FORWARD: Seat position is forward BKWARD: Seat position is backward FAIL: Failure detected	FORWARD/BKWARD	-
PASSENGER CLASS	Passenger Classification/ NG: Data is not determined NONE: Vacant CHILD: Child (less than 36 kg (79.37 lb)) is seated SMALL: Adult (36 to 54 kg (79.37 to 119.05 lb)) is seated REGULAR: Adult (more than 54 kg (119.05 lb)) is seated FAIL: A failure is detected	NONE/CHILD/SMALL/REGULAR	-
D BUCKLE SW	Buckle switch (Driver side)/ OFF: The seat belt is not fastened ON: The seat belt is fastened NG: Data is not determined	OFF/ON	-
P BUCKLE SW	Buckle switch (Passenger side)/ OFF: The seat belt is not fastened ON: The seat belt is fastened NG: Data is not determined	OFF/ON	-
DISPLAY TYPE	Display type identification information/ LR: The display is indicated by LH/RH DP: The display is indicated by Driver/Passenger	DP	-
PAST CODES	Number of past trouble codes/ Min.: 0, Max.: 255	0	-